How to Install an Electric Strike in a Metal Door Frame
Install an Electric Strike, There are several types of electric strikes you can use in your metal door frame. Some are designed for installation with the strike and the frame together, while others are designed for the strike to be installed in the frame separately.
Mortise Locks
If you are installing a door that is framed by a metal or wood door frame Install an Electric Strike, you will need to install an electric strike. An electric strike is similar to a strike lock, but instead of using a mechanical lock, it uses an electrified one. It works by passing an electrical current through the strike plate in the frame.
To install an electric strike in a metal door frame, you will need to remove some of the frames. You can use a router to make the cut, but you will need to secure the strike in the wall studs.
The simplest way to do this is to cut the face of the frame to the size of the strike you are installing. However, you may need to make a larger opening in the frame if your strike is narrow.
Electric strikes are easy to install, but they do require some work. A power transfer device is needed to send the electrical current through the frame and to the lock.
Rim Latches
If you need to install an electric strike in a metal door frame, you’ll need a special type of rim latch. Most standard doors have a strike plate that fits a lock, and you need to match the type of electric strike with the type of lock. Some manufacturers even offer no-cut solutions, which require no modification to the jamb.
A rim latch is used on internal doors, gates, and outbuildings. It is also found in panic hardware, such as a rim exit device. When the door is closed, the latch will drop into a “D”-shaped hole in the strike.
Rim latches are very secure. This is because the back of the ramped surface of the strike is designed to keep the latch in place. Other types of latches include mortise locks, vertical rods, and cables.
An electric strike is installed on the frame of the door and uses a power transfer device to transfer electrical current from the back of the frame to the lock. In addition, the strike has a lip that bridges the gap between the strike and the door frame.
ANSI Prep Doorjambs
If you are considering installing an electric strike on a metal door frame, there are a few things to keep in mind. First, you need to determine if you are installing a non-handled or a standard ANSI type of strike. This will help you determine how much material you will need to remove from the doorjamb.
In order to install a standard ANSI strike, you will need to cut out a small rectangular hole in the doorjamb to accommodate the lip of the strike plate. If your door has an ANSI prep doorjamb, you may not have to do any frame cutting.
An ANSI prep doorjamb will have a center line on the latch bolt that will line up with the center line on the strike plate. When you place the keeper in the correct position, the deadlatch will be pushed into the pocket created by the strike.
In addition to the doorjamb’s center line, you will need to make a cutout in the face of the frame to allow for the strike’s lip. The length of the lip will vary depending on the application.
Integrated Sensor Options
Electric strikes are installed in door frames to provide an additional level of security. This type of lock is ideal for doors that are left open for extended periods of time. A fail-safe model is also available. It will remain in lock mode in the event of a power outage.
Many electric lock manufacturers offer an integrated sensor option to make installing the lock easier. These options include surface-mount and rim exit devices. In addition, the manufacturer’s shop drawings and product data sheets contain all the details necessary for a successful installation.
When installed on a metal door frame, an electric strike offers the ability to be locked and unlocked using a simple push-button. It is also possible to have the strike work with an integrated access control panel or standalone controller.
An electric strike system is easy to install and maintain. They are affordable and work with many different types of door frames. If a business has a safe room or main entrance, it may be worth considering a system.